Plumbing the fuel lines.....

After finishing some other projects I've been sidetracked with over the winter, I'm back to making F/C parts.

The fuel lines are made from solid copper wire and Brass fittings, then covered with braided tubing. After all the parts are bent, fit in place and covered with braiding, everything is soldered together. All the fittings will be painted Red and Blue and the braiding will get a light coat of paint to keep it from tarnishing.

Although the braiding seems to be little bit out of scale, I'm very satisfied with the overall look........................................

As always, comments and suggestions are welcome.........Mike